Notes About Usage - Siemens SIMATIC ITP1000 Operating Instructions Manual

Safety notes

2.4 Notes about usage

2.4 Notes about usage
NOTICE
Possible restricted functions in case of non-validated function of the plant.
The device is tested and certified based on the technical standards. In some cases function
restrictions can occur during the operation of your plant.
To avoid restrictions, validate the correct function of the plant.
Note
Ventilation of the device
The device is cooled through several ventilation slots: Ensure that these ventilation slots are
not covered or closed during operation.
Note
Requirements for base on which device is operated
Avoid any damage to the device from scratching or overheating.
Only place the device on a flat, even, clean and hard base.
28
Operating Instructions, 05/2017, A5E37340160-AB
SIMATIC ITP1000