Siemens SIMATIC ITP1000 Operating Instructions Manual page 41

Location of the connection sockets on the device and on the docking station
You will find information on the connection sockets for peripheral devices in the following
sections:
● Design of the device (Page 13)
● Layout of the docking station (Page 19)
Connecting a monitor
You can also use the appropriate adapters to connect monitors with other corresponding
interfaces to the DisplayPort connection.
Connecting devices to the USB socket
Connect devices such as drives, mouse, keyboard, printer and USB headsets to the USB
sockets.
Connecting audio devices to the UAJ socket
The audio socket on the left-hand side of the device is a so-called UAJ connection (Universal
Audio Jack) for a 3.5mm jack.
Depending on the function, a UAJ connector has 2 to 4 contact areas. Depending on their
position, they are generally referred to as Tip, Ring 1, Ring 2 and Sleeve.
Depending on the function or standard, the contacts are assigned differently.
The audio controller of the device recognizes the assignment of the contacts of the UAJ
connector depending on the connected audio device and is automatically configured.
You can connect the following audio devices to the UAJ connection:
● Audio device with line-out
● Audio device with line-in
● Headphones
● Microphone
● Headset (with headphones and microphone) with the following standards:
– OMTP: Standard for audio devices from Nokia, etc.
– CTIA: Standard for audio devices from Apple®
Note
Connection of microphone and headphones with two 3.5mm jacks
An adapter is needed to simultaneously connect a microphone and headphones to a
3.5-mm-jack.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Commissioning the device
3.6 Connecting peripheral devices
41