General Information On Commissioning - Siemens SIMATIC ITP1000 Operating Instructions Manual

Write down identification data
1. Transfer the identification data in the table shown below into the "Value" column.
In the "Source" column you can find information on where you can find the required value.
Identification date
Order number
Serial number
Product Key
(Microsoft Windows Product Key)
Ethernet address 1
3.2

General information on commissioning

NOTICE
Risk of damage to the device!
Make sufficient allowances for the device to warm up to room temperature before you put it
into use. If condensation develops, wait at least 12 hours before switching on the device.
Requirements for commissioning
● The power supply is connected or the battery is fully charged.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
3.2 General information on commissioning
Source
Rating plate
Rating plate
COA-label
See BIOS selection menu >
SCU > (Page 84)
Menu "Advanced" > "Peripheral
Configuration"
Commissioning the device
Value
6AV...
S VP...
31