Configure Rf Region - Motorola fx7400 Integrator Manual

4 - 16 FX Series RFID Readers Integrator Guide

Configure RF Region

Different countries have different RF regulatory requirements. To assure regulatory compliance, set the reader for
specific regulatory requirements in the country of reader operation using the
choices on the page are limited to the selections compatible with the reader.
NOTE Region configuration is not required for readers configured to operate in the United States region (under
FCC rules).
Configure Region Settings Window
Figure 4-18
•
Region of Operation
countries which have regulatory approval to use with the current board.
•
Communication Standard
supports. If a region supports only one standard, it is automatically selected.
•
Frequency Hopping
•
Selected Channels
•
Please confirm
•
Set Properties
regulatory requirements by checking the
These settings only affect the display. Use
Additional Options
•
Listen before Talk
of operation supports this.
•
Frequency Hopping
region of operation supports this.
- Sets the country of operation. Select this from the drop-down list which includes
- Sets the communication standard from the list of standards chosen region
- Check to select frequency hopping.
- Sets the appropriate channel(s).
- Check the check box.
I understand
- Sends the changes to the reader. Confirm that the choices are in compliance with local
Commit/Revert on page 4-31
- Turns or the listen before talk option. This option appears only if the chosen region
On Off
- Turns or the Frequency hopping option. This option appears only if the chosen
On Off
check box.
I understand
to save the changes.
Configure Region Settings
page. The