Table of Contents
Advertisement
Back Room Receiving
Back Room Receiving example prameters: The reader reads 500 tags in 5 seconds, within a distance of 10 feet.
Can be single item, multiple items, or multiple tags. Readers can be in a dense environment or separated /shielded
area. The opportunity to write is typically a lower priority then speed. Additional filtering may be needed. Indicate
how reads can be triggered. Indicate how to show direction with paired antennas.
Installation
Identify the unique installation challenges for the Back Room Receiving example. The location of the reader and
antennas (under the read table) will be discussed and the procedures to optimize the tag reads.
•
Reference
RFID Technology Overview on page 2-1
• Reference
• Reference
and provide the unique communications connections installation for a Back Room Receiving installation.
• Reference
installation requirements for a Back Room Receiving installation. Discuss the 4 AN480 antenna locations
and the 30dBm power setting.
Configuration and Optimization
Identify the unique configuration and optimization challenges for the Back Room Receiving example. Reader
reader was optimized to read 50-100 tags in 5 seconds, within 2-6 feet. Reference
configuration overview.
•
Reference
Reader Administrator Console on page 4-12
•
Reference
Managing the FX Series RFID Readers on page 4-2
and provide the unique reader management configuration optimization requirements for a Back Room
Receiving installation.
Optimizing Reader Functions
Identify the unique function optimization challenges for the Back Room Receiving example.
For each setup illustrate:
•
Filtering (select statement)
•
Query tuning (Q, Session, Select bit)
•
Post read filtering
•
Writing, locking, killing
Troubleshooting
Identify the unique reader troubleshooting challenges for the Back Room Receiving example. Reference
Introduction on page 6-1
•
Reference
Troubleshooting on page 6-1
troubleshooting requirements for a Back Room Receiving installation.
Introduction on page 3-1
for an basic installation overview.
Communications Connections on page 3-6
Reading Tags on page 3-7
for a troubleshooting overview.
for RFID overview.
for standard communications connections overview
for standard overview and provide the unique tag reading
for standard procedures.
for standard reader management overview
for standard procedures and provide the unique reader
Set-Up Examples
Introduction on page 4-1
for a
5 - 7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
