Communication Settings
Use the
Communication
Configure Network Settings
The reader supports both automatic TCP/IP configuration via DHCP, and manual configuration. The
Address via DHCP:
Turning DHCP on displays the current IP address, subnet mask, default gateway, and DNS server. These values
are obtained from the DHCP server so cannot be manually changed.
To manually set the values, toggle the DHCP to Off and enter the values:
•
Current IP Address
•
Subnet Mask
•
(in dotted notation)
Gateway
•
(in dotted notation)
DNS Server
•
MAC Address
•
– Configures the web server in either HTTP (unsecure) or HTTPS (secure) mode.
Web Server
•
– Configures the Shell to either Telnet (unsecure) or SSH (secure) mode, or disables the shell.
Shell
•
– Configures the File server to either FTP (unsecure) or FTPS (secure) mode, or disables the
File Server
shell.
NOTE The network configuration updates only upon clicking Commit. If the commit is not successful, the
system indicates the problem and allows repeating the operation. DHCP and IP address changes update
only upon reader reboot.
Click
1.
Communication
Configure Network Settings Window
Figure 4-21
submenu to access the following functions.
button toggles the DHCP
On
(in dotted notation)
(in dotted notation)
– Specifies the reader MAC address.
>
. The
Network
Configure Network Settings
or
, depending on the current state.
Off
window appears.
Administrator Console 4 - 19
Obtain IP