Disassembly Of Main P.c.b - Panasonic MW-20EB Service Manual

Step 5 : Paste the Speaker (2).
Caution 1 : Ensure that the Speaker (2) is properly place
onto the Bottom Case Unit as picture shown.
Caution 2 : Ensure the Felt end is in line with the Rib on the
Bottom Case Unit.
8.7.

Disassembly of Main P.C.B.

• Refer to "Disassembly of Bottom Case Unit"
Caution : This P.C.B. is installed with a battery. Replace
with correct part. Refer to Mechanical Replacement Parts
List for the part no.
• Disassembly of Bottom Shield
Step 1 : Gently peel off the Conductive Tape from the Bottom
Shield.
Step 2 : Detach 2P Cable at the connector (CN1003) on the
Main P.C.B..
Caution 1 : During assembling of the Bottom Shield,
ensure the 2P Cable are properly inserted into the Slot.
Caution 2 : During assembling of the Bottom Shield, paste
the Conductive Tape back on the Bottom Shield, replace it
if torn.
37