Panasonic MW-20EB Service Manual page 39

Step 7 : Release the connector lock levers as arrow shown.
Caution : Do not exert strong excessive force to release
the Connector Lock Lever or they may be damaged.
Step 8 : Detach 34P FPC at the connector (CN1301) on Main
P.C.B..
Step 9 : Detach 34P FPC at the connector (CN1302) on Main
P.C.B..
Caution : During assembling, ensure the FPC is properly
attached to the connector.
Step 10 : Release the connector lock lever as arrow shown.
Caution : Do not exert strong excessive force to release
the Connector Lock Lever or they may be damaged.
Step 11 : Detach 18P FFC at the connector (CN1002) on Main
P.C.B..
Caution : During assembling, ensure the FFC is properly
attached to the connector.
Step 12 : Remove Main P.C.B..
39