Disassembly Of Ir P.c.b - Panasonic MW-20EB Service Manual

8.10. Disassembly of IR P.C.B.

• Refer to "Disassembly of Bottom Case Unit"
• Refer to "Disassembly of Main P.C.B."
• Refer to "Replacement of Top Case Unit"
• Refer to "Replacement of Rear Panel Unit"
Step 1 : Remove 1 screw.
Step 2 : Lift and flip over IR P.C.B. as arrow shown.
Step 3 : Detach 7P FFC at the connector (CN915) on IR P.C.B..
Step 4 : Detach 2P Cable at the connector (CN902) on IR
P.C.B..
Step 5 : Remove IR P.C.B..
Caution 1 : During assembling of the IR P.C.B., ensure that
the wire is dressed as shown in the diagram below.
Caution 2 : During assembling, ensure the IR P.C.B. is
properly seated onto the locators.
45