Toshiba Strata DK User Manual page 26

Features
Outgoing Data Call
To issue commands to the modem
1. Type ATDT (a system
CO line access code,
the telephone number
of the external
modem, or data
service) from your PC
or terminal keyboard,
and then press
Enter.
2. Exchange the data.
18
Wait 5~30 seconds for the following screen to display
on your PC or terminal screen.
ATDTYYYYYYYYYYYYYY
CONNECTXXXX
This display indicates that a connection has been
established between the Strata DK system modem and
the external modem.
XXXX = data transmission speed
YYYYYYYYYYYYYY = external telephone number
(CO line access code, see
access codes)
The commands issued and the telephone number
dialed in this step are sent to the system modem
transparently through the system DIUs.
Note If the modem seizes a CO line that appears on
your data telephone, the CO line LED turns ON
and is red.
Entry Example: If the telephone number is (714) 837-
4408 and the call is made on CO line 1, type
ATDT80117148374408 and press Enter . ( ATDT
is the modem dial command; 801 is the access code for
system CO line Group 1; and 7148374408 is the
telephone number.)
The data can be exchanges by using your terminal or
PC software program.
Table 4 on Page 28 CO line
Strata DK PC/Data Interface 5/00