Terminating a Call to an Internal Modem from a Terminal or PC
This sequence should only be used if your modem is connected to a system station
port. This sequence should not be used if your modem is connected directly to a CO
line.
1. Hold down the
Shift key and type
+++ .
2. Type ATH , and then
press Enter .
To terminate the call from your data telephone
'DWD
Press
5HOHDVH
Strata DK PC/Data Interface 5/00
The following screen displays on your PC or terminal
screen.
The Data and Modem LEDs turn OFF.
The following screen displays on your PC or terminal
screen.
This display indicates that the call is terminated.
If your modem is connected to a system station port
.
directly to an outside line. The Data Call and Modem
LEDs turn OFF.
The following screen displays on your PC or terminal
screen.
This display indicates that the call is terminated.
+++
OK
ATH
OK
NO CARRIER
Features
Outgoing Data Call
19