Switch Back To The Voice Call Using Privacy Override - Toshiba Strata DK User Manual

6. Type ATD#42 from
your PC or terminal,
and then press
Enter .
7. Type ATA from the
external terminal or
PC, and then press
Enter (do not hang
up the external
telephone).
8. Exchange the data.

Switch Back to the Voice Call Using Privacy Override

To perform this function, your data telephone must have Privacy Override assigned in
system programming.
1. Make sure that the
external telephone is
off-hook.
Strata DK PC/Data Interface 5/00
Switch From Outside Voice Call to Data Call
The following screen displays on your PC or terminal
screen.
ATD42
CONNECTXXXX
This display indicates that the internal modem has
gone off-key and originated. XXXX indicates the data
transmission speed.
The external modem answers.
Wait 3~20 seconds the following screen to display on
the external PC or terminal screen.
ATA
CONNECTXXXX
This display indicates that a data path has been
established. XXXX indicates the data transmission
speed.
Exchange data using your terminal or PC software
program. The voice call is on-hold during the data
exchange. The external telephone can be placed on-
hook or remain off-hook during data transmission.
If the voice call is on a CO Line that appears on your
[DN] button, refer to the following procedure, "To
switch back to the voice call using Executive
Override."
Features
25