Configuration Sheet: Recall Timing; Department Extension Groups; Program 16-02-01 - NEC SL2100 Getting Started Manual

SL2100 GETTING STARTED GUIDE
4 Change the setting to 200 (this is equivalent to 1000mS) and press
Hold key to confirm the entry and step to the next option.
5 When you are done, press Mute key several times to return to
Programming Mode.
6 Press Speaker key to save changes and exit if you are finished.

2.12.2 Configuration sheet: RECALL Timing

With defaults shown in below table.
82-04-04
default=20
(100mS)
Setting
Equivalent
duration (mS)

2.13 Department Extension Groups

This feature allows you to group telephones into department extension groups, as well as define how calls will
ring within that group and the frequency. You may want to change this setting if you have people that work within
a group and you need the department, not a specific individual. The call will ring at any telephone that is
available within the group. If they do not answer, the call will step to the next member.
The telephones are placed into department groups. There are 50 groups available.
The group is given a number (pilot number) that you dial to reach the group.
You can choose the following options for each group.
How the calls will ring around the group - either in a set order of priority or randomly at any telephone.
Try each telephone once or keep hunting - your call can ring at each available telephone in the group and if
not answered stay at the last member or keep trying each member.
How long each member rings before the call will step on to the next one available.

2.13.1 Program 16-02-01

Set the telephones into a department group.
2.13.1.1 Default Setting
All telephones (except Extension 213-228 (:Group 50) are in department Group 1.
No. Operation
1 Log into Programming Mode.
If you have already logged into programming mode, skip this
operation.
2 Dial 16 02 01. For each telephone, enter the Group number (1-50) that
telephone. You can overwrite the current entry and press Hold key to
confirm the entry and step to the priority option.
3 For each telephone enter the priority number (1-200), you can
overwrite the current entry and Press Hold key to confirm the entry
and step to the next telephone.
When you are done, press Mute key several times to return to
4
Programming Mode.
5 Press Speaker key to save changes and exit if you are finished.
64
82-04-07 82-04-08
default=21 default=132
(105mS) (660mS)
82-04-08
Max. Flash Time 132
←
Display Shows;
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
16-02-01 TEL101
Extension Grp 1
← - +
16-02-01 TEL101
1
Priority
← - +
→
→
→