Chapter 2 Installation; Section 1 Before Installation; Installation Procedure (Replacing An Existing Telephone System); Confirm The Installation Location - NEC SL2100 Getting Started Manual

Chapter 2 Installation

Section 1 Before Installation

1.1 Installation Procedure (Replacing an existing Telephone System)

The procedure below outlines the required steps for installing the SL2100.
1. Confirm the
installation
location.
4. Unpack all the
items and check
for damaged or
missing parts.
8. Connect the
Trunk lines.
12. Connect the
AC cord and
power up the
SL2100 system.

1.1.1 Confirm the Installation Location

The Installation location must be confirmed before installing the system.
AC outlet: Quantity of AC outlet, AC cord fits for the distance between Chassis and AC outlet

Weight tolerance for the wall: Material of the wall

Installation areas: enough space, temperature, humidity and other environmental requirements

Earth Ground: available

Trunk Line: available


1.1.2 Prepare the necessary tolls (Not supplied)

Make sure the necessary tools (screw driver set, pliers set, etc.) are available.
Required Items
Telephone Cables
Cat 5 Straight Cable (or equivalent)
RJ11 Plugs
Fixing Tools for RJ45 Plug and cable
2-conductor connectors for outside(CO) line
2. Prepare the
necessary tools,
Cables, RJ45
connectors,....etc,
5. Mount the
SL2100 chassis
on the wall.
9. Consider the
power failure to
connect the
backup batteries.
13. Test the
SL2100 system.
Recommended cable type: Twisted Pair
Conductor diameter: 0.4 to 0.6 mm
Maximum cable length (with 0.5mm diameter cable):
SL2100 system Telephone/DSS Console --- 300 meters
Analog Telephone --- 1125 meters
SL2100 IP Multiline Terminal --- 100 meters
SL2100 GETTING STARTED GUIDE
3. Are you replacing an existing
telephone system? If yes, consider
using the existing wiring and
installation location.
6. Insert the CPU
board and other
optional board into
the chassis.
10. Earth ground
connection.
14. Configure the
SL2100 system to
customer's
requirements.
Specification
7. Consider the
wiring and connect
the telephones.
11. Secure the
cables.
15. Install optional
Items.
23