Certification; Agency Approvals; Fcc Compliance - Siemens RUGGEDCOM RX1400 Installation Manual

RUGGEDCOM RX1400
Installation Guide

Certification

The RX1400 device has been thoroughly tested to guarantee its conformance with recognized standards and has
received approval from recognized regulatory agencies.
• Section 6.1, "Agency Approvals"
• Section 6.2, "FCC Compliance"
• Section 6.3, "Industry Canada Compliance"
• Section 6.4, "EMC and Environmental Type Tests"
Section 6.1

Agency Approvals

Agency
TUV
CE
FCC
FDA/CDRH
ISO
Industry Canada
Section 6.2

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference on his own expense.
Agency Approvals
Standards
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
EN 60950-1, EN 61000-6-2, EN
55022, EN 60825-1, EN 50581
FCC Part 15, Class B
21 CFR Chapter I, Sub-chapter J
ISO9001:2008
ICES-003
Comments
Approved
CE Compliance is claimed via
Declaration of Self Conformity Route
Approved
Laser Eye Safety
Designed and manufactured using an
ISO9001: 2008 certified quality program
Chapter 6
Certification
31