Radio Reassembly; Figure 8-16. Assemble The Battery Seal; Figure 8-17. Assemble The Main O-Ring At Antenna Holder - Motorola APX 3000 Basic Service Manual

Disassembly/Reassembly Procedures: Radio Reassembly
8.6

Radio Reassembly

This section contains instructions for reassembling the radio.
8.6.1 Reassemble the Battery Seal(40†††*)
1. Assemble the battery seal (40†††*) as shown in
2. With the Main Board (29††) seated in the Chassis (33†††), gently assemble the Main O-Ring
(28†††*) and the connector to the Antenna Holder as shown in

Figure 8-16. Assemble the Battery Seal

Figure 8-17. Assemble the Main O-Ring at Antenna Holder

Figure 8-16.
Battery Seal
Contact
Figure 8-17.
NFC Flex Connector
8-15
Antenna Holder