Service Aids; Field Programming; Table 4-2. Service Aids - Motorola APX 3000 Basic Service Manual

4-2
4.2

Service Aids

Refer to Table 4-2
this family of radios. These kits and/or parts are available from the Radio Products and Solutions
Organization offices listed in Replacement Parts Ordering. While all of these items are available from
Motorola, most are standard shop equipment items, and any equivalent item capable of the same
performance may be substituted for the item listed.
Motorola Part
Number
PMLN6208_ Chassis Opener
66012031001 Battery Adapter
66012075001 Vacuum Test Fixture
NLN9839_ Vacuum Pump Kit
5880384G68 SMA to BNC Adapter
RVN5224_ Customer Programming
Software (CPS) and Tuner
Software
PMKN4012_ Programming Cable
PMKN4013_ Programming/Service Cable
RLN4460_ Portable Test Set
66012036001 APX3000 Covert Board
Debugging Fixture
4.3

Field Programming

This family of radios can be aligned and programmed in the field. This requires specific equipment
and special instructions. Refer to the online help in the Customer Programming Software (CPS) for
complete field programming information.
Recommended Test Equipment and Service Aids: Service Aids
for a listing and description of the service aids designed specifically for servicing

Table 4-2. Service Aids

Description Application
Used to disassemble chassis from housing.
Used in place of battery to connect radio to an external power
supply.
Used to connect the vacuum/pressure hose to the radio.
Vacuum pump with gauge and vacuum hose. Requires
Vacuum Test Fixture (66012075001).
Adapts radio's antenna port to BNC cabling of test equipment.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
Used to program the radio through Customer Programming
Software and Tuner Software.
Used to program and service the radio through Customer
Programming Software and Tuner Software.
Used for radio performance checks. Connects to radio's
universal connector and allows remote switching and signal
injection/outputs for test equipment measurements.
To be assembled with Flex, Debug (0104055J17), flex,
Extended Main (0104052J79), Assy, Flex, NFC
(0104052J74), front housing kit (0104052J79), and FSTN
Display with Bezel (72012008001).