Serviceable Components Of The Main Sub-Assemblies; Figure 8-12. Remove Battery Seal; Figure 8-13. Serviceable Components - Main Board Assembly - Motorola APX 3000 Basic Service Manual

8-10
8.4.4.4 Removal of Battery Seal (40†††*)
1. Remove the battery seal at battery contact (40†††*) as shown in
8.5

Serviceable Components of the Main Sub-Assemblies

8.5.1 Servicing Main Board Assembly
8.5.1.1 Servicing Coin Cell:
1. Complete steps from
2. Remove the coin cell with the Black Stick.
NOTE: Make sure the positive side is facing upwards.
3. Press the new coin cell into the battery carrier until it is secured and fully snapped into place.
Disassembly/Reassembly Procedures: Serviceable Components of the Main Sub-Assemblies

Figure 8-12. Remove Battery Seal

Plastic Collar
Coin Cell
Figure 8-13. Serviceable Components – Main Board Assembly
Section 8.4.4.1.
Battery Seal
Contact
Thermal Pad
through Section 8.4.4.3.
Figure 8-12.