Display Radio Test Mode; Table 5-2. Test-Mode Displays - Motorola APX 3000 Basic Service Manual

Performance Checks: Display Radio Test Mode
5.2

Display Radio Test Mode

This section provides instructions for performing tests in display radio test mode (DRSM or
debugging fixture required).
NOTE: The radio needs to be attach to a Display RSM to enable the display capability.
5.2.1 Access the Test Mode
To enter the display radio test mode:
1. Turn the radio on.
2. Within 10 seconds, press Middle Button five times in succession.
The radio shows a series of displays that give information regarding various version numbers
and subscriber specific information. The displays are described in
Name of Display
Service
Host version
DSP version
Secure version
KGI algorithms name
(Encryption Type 1)
KG2 algorithms name
(Encryption Type 2)
KG3 algorithms name
(Encryption Type 3)
KG4 algorithms name
(Encryption Type 4)
KG5 algorithms name
(Encryption Type 5)
KG6 algorithms name
(Encryption Type 6)
Model number
Serial number

Table 5-2. Test-Mode Displays

Description
The literal string indicates the radio has
entered test mode.
The version of host firmware is displayed.
The version of DSP firmware is displayed.
Version of the encryption software
Type of encryption being used
Type of encryption being used
Type of encryption being used
Type of encryption being used
Type of encryption being used
Type of encryption being used
The radio's model number, as
programmed in the codeplug
The radio's serial number, as programmed
in the codeplug
Table 5-2.
Appears
Always
Always
Always
When the radio is secure
equipped
When the radio is secure
equipped
When the radio is secure
equipped and 2 or more
algorithms are loaded
When the radio is secure
equipped and 3 or more
algorithms are loaded
When the radio is secure
equipped and 4 or more
algorithms are loaded
When the radio is secure
equipped and 5 or more
algorithms are loaded
When the radio is secure
equipped and 6 or more
algorithms are loaded
Always
Always
5-3