Detachments - Toshiba MML-AP0124H2UL Service Manual

9. DETACHMENTS

9-1. Floor Console Exposed Type
WARNING
Be sure to turn off the power supply and the breaker
and then start a work.
No. Spare parts
Electric parts 1. Detachment
assembly (1) Remove the suction grilles (2 pieces).
(2) Remove the wire guard.
(3) Remove the front panel.
(4) Remove the discharge grille.
(5) Remove the switch box.
(6) Take off the fan motor lead from the clamp, slide
(7) Take off the TA sensor from the clamp.
(8) Take off the connectors of TC1, TC2, and TCJ
(9) Remove the relay connector of the PMV lead.
(10) Remove body of the electric parts assembly.
2. Attachment
Following step 1 of
as original in the reverse procedure.
Work procedure
(No screw fixing)
(M4 screw: 4 pieces)
(M4 screw: 2 pieces)
(M4 x 0.8" (20L): 2 pieces)
(M4 screw: 3 pieces)
the glass tube, and then remove the relay connector.
sensors from P.C. board.
CN100...TC1 (3P: Brown)
CN101...TC2 (2P: Black)
CN102...TCJ (2P: Red)
* Unlock the lock of the housing part, and then
remove the connectors.
(M4 screw: 1)
and (1) to (10), attach the parts
CAUTION
Be sure to put on the gloves at disassembling work;
otherwise an injury will be caused by a part, etc.
Electric parts
assembly
Clamp
Clamp
– 69 –
Remarks
Relay
TC1, TC2, TCJ connector
sensors
(PMV lead)
Fan motor lead M4 screw
Relay connector
TA sensor
(Fan motor lead)
Glass tube