Port - Siemens SINUMERIK 840D sl Manual

Spare Parts/Accessories
11.2 NX10/15
Mounted bracket.
11.2.6

Port

NX10/15 DRIVE-CLiQ topology
NX10/15 components can be connected to the control unit via DRIVE-CLiQ. The following
rules apply to wiring of the NX10/15:
● Only one star topology is permitted between the NX10/15 and the control unit. This
● DRIVE-CLiQ ports not assigned to NX10/15 can be wired to other DRIVE-CLiQ
● Once an NX10/15 has been connected and configured, you cannot simply insert it into a
100
Closing the cover.
means that only one NX10/15 can be operated per DRIVE-CLiQ port on a control unit.
components.
different DRIVE-CLiQ port, as the addresses of the integrated drives are set permanently
from the point of view of the PLC. The following table illustrates this relation:
Manual, 03/2010, 6FC5397-0AP10-3BA0
NCU