9.6
Ethernet
Application
The following connections can be established via the Ethernet interfaces:
● X120 provides the link to the system network (e.g. operator panels).
● X130 connects the Control Unit to the company network.
● X127 is used for remote diagnostics via teleservice adapter IE.
Cable specification
Table 9-6
Characteristics
Plug-connector type
Cable type
Max. cable length
Note
A crossover cable is required for the direct link between the Control Unit and the TCU.
9.7
PROFINET
9.7.1
Wiring PROFINET
Prerequisite
For SINUMERIK 840D sl, a PROFINET system can only be installed with the following
Control Units:
● NCU 720.2 PN
● NCU 730.2 PN
NCU
Manual, 03/2010, 6FC5397-0AP10-3BA0
You can find further details in the following manuals:
– SINUMERIK 840D sl Basesoftware and Operating Software Commissioning Manual
– SIMATIC TS Adapter IE Manual
Cable specification for X120, X130, and X127
Version
RJ-45 jack
Industrial Ethernet cable (CAT5)
100 m
Connecting
9.6 Ethernet
69