Start-Up And Mode Selector Switch - Siemens SINUMERIK 840D sl Manual

Operating and display elements

5.6 Start-up and mode selector switch

5.6 Start-up and mode selector switch
Layout
The Control Unit has two coding switches in the lower section of the front panel.
● The left switch (labeled SIM/NCK) is the NCK startup switch.
● The right switch (labeled PLC) is the PLC mode selector switch.
Additional references
CNC Commissioning Manual Part 1 (NCK, PLC, drive)
38
Setting during normal operation: "0"
Setting during normal operation: "0"
Figure 5-4 Startup and mode selector switch
Manual, 03/2010, 6FC5397-0AP10-3BA0
NCU