Melsec-Q Series Extension Cable - Mitsubishi Electric MELSEC iQ-R Series Configuration Manual

MELSEC-Q series extension cable

Connection procedure
RQ extension base unit
(1)
MELSEC-Q series extension base unit
(1)
(3)
(4)
(5)
Removal procedure
Remove the connector part of the extension cable after loosing the fixing screws and checking that the screws are coming off
completely.
5 INSTALLATION AND WIRING
120
5.6 Connection/Disconnection of Extension Cable
(2)
1.
Remove the extension connector protective
cover (2) from the extension connector cover
(1) of the RQ extension base unit before the
extension cable is connected to the base unit.
For the MELSEC-Q series extension base unit,
peel the seal (3) on the extension connector
cover (1).
2.
Connect the extension cable connector to the
connector of the base unit holding the
connector part (4) of the extension cable
correctly.
3.
After connection, tightening the connector
fixing screws (5) on the extension cable
connector securely. (tightening torque:
0.20Nm)