Performance Specifications Of Power Supply Module - Mitsubishi Electric MELSEC iQ-R Series Configuration Manual

4.2
Performance Specifications of Power Supply
Module
This section describes the performance specifications of the power supply module.
Item
Input power supply voltage
Input frequency
Input voltage distortion factor
Maximum input apparent power
Maximum input power
Inrush current
Rated output current 5VDC
24VDC
Overcurrent 5VDC
protection
24VDC
Overvoltage 5VDC
protection
Efficiency
Allowable momentary power failure
time
Withstand voltage
Insulation resistance
Noise immunity
Fuse
Contact output Application
section
Rated
switching
voltage/current
Minimum
switching load
Response time
Life
Surge
suppressor
Fuse
Terminal screw size
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
External dimensions Height
Width
Depth
Weight
*1 It will be shorter than 10ms if the input voltage is lower than 24VDC.
AC input power supply module
R61P R62P
100 to 240VAC
(85 to 264VAC)
50/60Hz5%
Within 5%
130VA 120VA

20A, 8ms or less
6.5A 3.5A

0.6A
7.1A or higher 3.8A or higher

0.66A or higher
5.5 to 6.5V
76% or more
Within 20ms
2300VACrms per minute (altitude 0 to 2000m),
Between the combined "line input/LG terminals" and the "FG terminal
and output"
10M or higher by 500VDC insulation resistance tester (between the combined "line input/LG terminals" and the
"FG terminal and output", the line input and LG terminals, the output and FG terminals)
• Noise voltage 1500Vp-p, noise width 1s, noise frequency 25 to 60Hz
(noise simulator condition)
• Noise immunity test IEC 61000-4-4: 2kV
Built-in (user-unchangeable)
ERR contact
24VDC, 0.5A
5VDC, 1mA
Offon: 10ms or less
Onoff: 12ms or less
Mechanical: 20 million times or more
Electrical: Rated switching voltage/current, 100 thousand times or more
None
None
M4 (M3.5 for +24V and 24G terminals of the R62P)
0.75 to 2
RAV1.25-4, RAV2-4, thickness of 0.8mm or less, up to two solderless terminal connections per terminal
(for the +24V and 24G terminals of the R62P: RAV1.25-3.5, RAV2-3.5, thickness of 0.8mm or less, up to two
solderless terminal connections per terminal)
M4 screw: 1.02 to 1.38Nm
M3.5 screw: 0.66 to 0.89Nm
106mm (Base unit mounting side: 98mm)
54.6mm
110mm
0.41kg 0.45kg
R64P R64RP
160VA
9A

10.0A or higher

0.46kg

4.2 Performance Specifications of Power Supply Module

DC input power supply module
R63P R63RP
24VDC 24VDC
(15.6 to 31.2VDC) (19.2 to 31.2VDC)



50W
100A, 1ms or less (24VDC input)
6.5A

7.1A or higher

70% or more
*1
Within 10ms (24VDC input)
510VAC per minute (altitude 0 to
2000m),
between primary terminal and 5VDC
terminal
Noise voltage 500Vp-p, noise width 1s,
noise frequency 25 to 60Hz (noise
simulator condition)
0.41kg
4 SPECIFICATIONS
4
85