D-Link DGS-1210-10 Manual page 112

4 Web-based Switch Configuration
Source Port: Specifies the source port.
Source Port Mask: Defines the range of source IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Destination Port: Specifies the destination port.
Destination Port Mask: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 0 – 15, set mask of FFF0.
Source IPv6 Address: Defines the range of source IP addresses, relevant to the ACL rules. For example, to
set 2002:0:0:0:0:0:b0d4:0, use mask 128.
Destination IPv6 Address: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128.
Action: Specifies the ACL forwarding action matching the rule criteria. Permit forwards packets if all other
ACL criteria are met. Deny drops packets if all other ACL criteria is met.
Click Next button then the ACL profile is added.
2) Selecting the field of interest will display the next page which shows the follows:
Figure 4.132 - Add Access Rule – IPv6 Protocol ID
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).
1 0 5
1 0 5
D-Link Smart Managed Switch User Manual