Config Account Admin Password; Save; Debug Info - D-Link DGS-1210-10 Manual

6 Command Line Interface
DGS-1210-52MP> show route ipv6
IPv6 Static Route State : Disable
DGS-1210-52MP>

config account admin password

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the account admin password:
DGS-1210-52MP> config account admin password 1234
DGS-1210-52MP>

save

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DGS-1210-52MP> save
Building configuration ...
[OK]
DGS-1210-52MP>

debug info

Purpose
Syntax
To display the configuration of an IP interface on the Switch.
config account admin password <passwd>
The config account admin password command sets the
administrator password.
<passwd> − The new password of the administrator.
None.
To save changes in the Switch's configuration to non-volatile
RAM.
save
The save command saves the configuration changes to the
memory.
None.
None.
To display the ARP table and MAC FDB information of the
Switch.
debug info
1 4 7
1 4 7
D-Link Smart Managed Switch User Manual