D-Link DGS-1210-10 Manual page 144

6 Command Line Interface
Command
reset config
show boot_file
show firmware
information
show flash
information
show ipif
show switch
show route
config account
save
debug info
Each command is listed in detail, as follows:
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display a list of commands of the switch:
DGS-1210-52MP> ?
USEREXEC commands :
config account admin password <passwd>
config firmware image_id <integer (1-2)> {delete | boot_up }
config ipif <ipif_name> { ipaddress <ip-address> <subnet-mask> gateway <gw-add
ress> | dhcp | bootp }
config ipif <ipif_name> { ipv6 ipv6address <ipv6networkaddr> | dhcpv6_client {
enable | disable}}
debug info
download {firmware_fromTFTP {<ipaddr>| <ipv6addr>} <path_filename (64)> image_
id <integer 1-2> | cfg_fromTFTP {<ipaddr>| <ipv6addr>} <path_filename (64)>}
logout
ping <ip_addr>
ping6 <ipv6addr>
reboot
reset config
save
Parameter
[<ipif_name>]
{ipv4 | ipv6}
admin password <passwd>
To display a list of commands.
?
The ? command displays a list of commands of the switch.
None.
None.
1
1
D-Link Smart Managed Switch User Manual
3 7
3 7