Show Switch; Show Route - D-Link DGS-1210-10 Manual

6 Command Line Interface
DHCPv6 Client State
DGS-1210-52MP>

show switch

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
DGS-1210-52MP> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System serial number
MAC Address
DGS-1210-52MP>

show route

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IPv4 & IPv6 route status on the Switch:
DGS-1210-52MP> show route ipv4
IPv4 Static Route State : Disable
: Disabled
To display the information of the Switch.
show switch
The show switch command displays the status of the switch.
None.
None.
:
:
:
: 0 days, 0 hrs, 12 min, 9 secs
: 01/01/2016 00:10:30
: F1
: 6.00.005
: 1.00.003
: QBDES12105200
: 4A-6F-6E-01-01-01
To display the routing status of IPv4 or IPv6 on the Switch.
show route {ipv4 | ipv6}
The show route command displays the routing status of IPv4 or
IPv6 on the Switch.
None.
None.
146
D-Link Smart Managed Switch User Manual