Show Switch; Config Account Admin Password - D-Link DGS-1210-10P Reference Manual

6 Command Line Interface
IP Setting Mode
IP Address
Subnet Mask
Default Gateway
DHCPv6 Client State
IPv6 Global Unicast Address: 3ffe:501:ffff:100:100::1/64
DGS-1210-52>

show switch

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the switch information:
DGS-1210-52> show switch
System Name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System Protocol version
System serial number
MAC Address
DGS-1210-52>

config account admin password

Purpose
Syntax
Description
Parameters
Restrictions
: Static
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
: Disabled
To display information about the Switch.
s how s witc h
The s how s witc h c ommand displays the status of the switch.
None.
None.
:
:
:
: 0 days, 6 hrs, 32 min, 17 secs
: 02/01/2012 06:32:19
: B1
: 3.10.006
: 1.00.005
: 2.001.004
: 1MB1733K0000A
: 00-01-02-03-04-05
To display the configuration of an IP interface on the Switch.
c onfig ac c ount admin pas s word <pas s wd>
The c onfig ac c ount admin pas s word c ommand sets the
administrator password.
<passwd> − The new password of the administrator.
None.
96
D-Link Web Smart Switch User Manual