D-Link DGS-1210-10P Reference Manual page 80

5 Configuration
The Add ACL Profile IPv6 ACL TCP port page contains the following fields:
Field
Source Port Mask
Destination Port Mask
Click Add button then the ACL profile is added.
To define the IPv6 ACL UDP profile: Select IPv6 ACL with UDP and click Select button. The updates to
show the follows:
Figure 5.94 – Add Access Profile (IPv6 ACL TCP)
Description
Defines the range of source Ports relevant to the ACL rules. (0=ignore,
1=check).
For example, to set 0 – 15, set mask of FFF0.
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 0 – 15, set mask of FFF0.
7 5
7 5
D-Link Web Smart Switch User Manual