D-Link DGS-1210-10P Reference Manual page 17

3 Getting Started
Option 1: Follow these steps to install the SmartConsole Utility via the autorun program on the installation
CD.
1. Insert the Utility CD into your CD-Rom/DVD-Rom Drive.
2. The autorun program will appear automatically.
3. Click on the "Install SmartConsole Utility" button and an installation wizard will guide you through the
process.
4. After successfully installing the SmartConsole Utility, you can open the utility by clicking Start >
Programs > D-Link SmartConsole Utility.
5. Connect the Smart Switch to the same L2 network segment of your PC and use the SmartConsole
Utility to discover the Smart Switches.
Option 2: Follow these steps to install the SmartConsole Utility manually.
1. Insert the Utility CD into your CD-Rom/DVD-Rom Drive.
2. From the Start menu on the Windows desktop, click Computer..
3. In the Run dialog box, type D:\D-Link SmartConsole Utility\D-Link_SmartConsole_Utility_v3.00.10.exe
(where D:\ represents the drive letter of your CD-Rom) and click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Start > Programs > D-Link SmartConsole Utility and open the SmartConsole
Utility.
6. Connect the Smart Switch to the same L2 network segment of your PC and use the SmartConsole
Utility to discover the Smart Switches.
For detailed explanations of SmartConsole's functions, please refer to Chapter 4
NOTE: Please be sure to uninstall any existing
SmartConsole Utility
installing the latest SmartConsole Utility.
NOTE: The current SmartConsole Utility does not
support IPv6 feature. Please be sure to install the
SmartConsole Utility from you PC with IPv4
address. After installed SmartConsole Utility, then
it can discover the DGS-1210 series with IPv6
address.
12
D-Link Web Smart Switch User Manual
from your PC before
SmartConsole Utility.