5 Configuration
The Add ACL Profile IPv4 ACL ICMP address page contains the following fields:
Field
Source IP Mask
Destination IP Mask
ICMP Type
ICMP Code
Click Add button then the ACL profile is added.
To define the IPv4 ACL IGMP profile: Select IPv4 ACL with IGMP and click Select button. The updates to
show the follows:
Figure 5.89 – Add Access Profile (IPv4 ACL ICMP)
Description
Defines the range of source IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 176.212.XX.XX, use mask 255.255.0.0
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 176.212.XX.XX, use mask 255.255.0.0
Sets the ICMP Type field as an essential field to match.
Sets the ICMP code field as an essential field to match.
7
1
7
1
D-Link Web Smart Switch User Manual