D-Link DGS-1210-10P Reference Manual page 42

5 Configuration
Voice VLAN: Select to enable or disable Voice VLAN. The default is Disabled. After you enabled Voice
VLAN, you can configure the Voice VLAN Global Settings.
VLAN ID: The ID of VLAN that you want to assign voice traffic to. You must first create a VLAN from the
802.1Q VLAN page before you can assign a dedicated Voice VLAN. The member port you configured in
802.1Q VLAN setting page will be the static member port of voice VLAN. To dynamically add ports into the
voice VLAN, please enable the Auto Detection function
Priority: The 802.1p priority levels of the traffic in the Voice VLAN.
Aging Time (1-120): Enter a period of time (in hours) to remove a port from the voice VLAN if the port is an
automatic VLAN member. When the last voice device stops sending traffic and the MAC address of this
voice device is aged out, the voice VLAN aging timer will start. The port will be removed from the voice VLAN
after the expiration of the voice VLAN aging timer. Selectable range is from 1 to 120 hours, and default is 1.
Click Apply to implement changes made.
Voice VLAN OUI Settings: This allows the user to configure the user-defined voice traffic's OUI. An
Organizationally Unique Identifier (OUI) is the first three bytes of the MAC address. This identifier uniquely
identifies a vendor, manufacturer, or other organization.
There are some pre-defined OUIs and when the user configures personal OUI, these pre-defined OUIs must
be avoided. Below are the pre-defined voice traffic's OUI:
Default OUI: Pre-defined OUI values, including brand names of 3COM, Cisco, Veritel, Pingtel, Siemens,
NEC/Philips, Huawei3COM, and Avaya.
User defined OUI: You can manually create a Telephony OUI with a description. The maximum number of
user defined OUIs is 10. It will occupy one ACL rule when selecting a user defined OUI by default, and to
configure one user-defined OUI will take extra one ACL rule. System will auto generate an ACL profile
(Profile ID: 51) for all the Voice VLAN rules.
Select the OUI and press Add to the lower table to complete the Auto Voice VLAN setting.
OUI Vendor
00:E0:BB 3Com
00:03:6B Cisco
00:E0:75 Veritel
00:D0:1E Pingtel
00:01:E3 Siemens
00:60:B9 NEC/ Philips
00:0F:E2 Huawei-3COM
00:09:6E Avaya
Note: Voice VLAN has higher priority than any
other features (including QoS). Therefore the
voice traffic will be operated according to the
Voice VLAN setting and not impacted by the QoS
feature.
Note: It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
D-Link Web Smart Switch User Manual
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya
3 7
3 7