D-Link DGS-1210-10P Reference Manual page 81

5 Configuration
The Add ACL Profile IPv6 ACL UDP port page contains the following fields:
Field
Source Port Mask
Destination Port Mask
Click Add button then the ACL profile is added.
2) Selecting the field of interest will display the related columns in the lower part of the page. Enter the
filtering mask and click Apply when done. A filtering mask is to specify the digit that you want to check. For
example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as
255.255.255.0.
Figure 5.95 – Add Access Profile (IPv6 ACL UDP)
Description
Defines the range of source Ports relevant to the ACL rules. (0=ignore,
1=check).
For example, to set 0 – 15, set mask of F.
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 0 – 15, set mask of F.
NOTE: A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).
Figure 5.96 – Access Rule List
NOTE: You cannot select Payload in a MAC ACL,
or L2 Header in IP ACL.
76
D-Link Web Smart Switch User Manual