5 Configuration
To define the IPv6 ACL ICMP profile: Select IPv6 ACL with ICMP and click Select button. The updates to
show the follows:
The Add ACL Profile IPv6 ACL ICMP address page contains the following fields:
Field
Source IP Prefix
Destination IP Prefix
ICMP Type
ICMP Code
Click Add button then the ACL profile is added.
To define the IPv6 ACL TCP profile: Select IPv6 ACL with TCP and click Select button. The updates to
show the follows:
Figure 5.93 – Add Access Profile (IPv6 ACL ICMP)
Description
Defines the range of source IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 2002:0:0:0:0:0:b0d4:0, use mask 128
Defines the range of destination IP addresses, relevant to the ACL rules.
(0=ignore, 1=check).
For example, to set 2002:0:0:0:0:0:bfd4:0, use mask 128
Sets the ICMP Type field as an essential field to match.
Sets the ICMP code field as an essential field to match.
74
D-Link Web Smart Switch User Manual