D-Link DGS-1210-10P Reference Manual page 75

5 Configuration
The Add ACL Profile MAC ACL contains the following fields:
Field
Source MAC Mask
Destination MAC Mask
802.1p
VLAN ID
Ether Type
Click Add button then the ACL profile is added.
To define the IPv4 ACL ICMP profile: Select IPv4 ACL with ICMP and click Select button. The updates to
show the follows:
Figure 5.88 – Add Access Profile (MAC ACL)
Description
Enter a MAC address mask for the source MAC address, e.g. FF-FF-FF-
FF-FF-FF.
Enter a MAC address mask for the destination MAC address, e.g. FF-FF-
FF-FF-FF-FF.
Selecting this option instructs the Switch to examine the 802.1Q VLAN
identifier of each packet header and use this as the full or partial criterion
for forwarding.
Selecting this option instructs the Switch to examine the 802.1p priority
value of each packet header and use this as the, or part of the criterion for
forwarding.
Selecting this option instructs the Switch to examine the Ethernet type
value in each frame's header.
70
D-Link Web Smart Switch User Manual