Chapter 7: Configuring the Debugger
Modifying Display Area Windows
Modifying Display Area Windows
You can reformat display-area screens by modifying their windows. For
example, you can reformat the high-level screen by resizing and moving the
high-level Code, Monitor, Backtrace, Journal, and Breakpoint windows. You
can also resize and move the alternate view of these windows.
This section shows you how to:
•
•
•
•
•
•
To resize or move the active window
1 Using the command line, enter:
Window Resize
And press the < Return> key.
2 Type T to position the top-left corner, B to position the lower-right corner, or
M to move the window without resizing it; then, use the cursor keys to move
the window or window border. When the window is at the desired location,
press the < Return> key to save the new coordinates.
If you make a mistake while resizing the window, press CTRL C or press Esc
twice to restore the previous coordinates.
226
Resize or move the active window.
Move the Status window (standard interface only).
Define user screens and windows.
Display user-defined screens.
Erase standard I/O and user-defined window contents.
Remove user-defined screens and windows.