Tool Management; Tool Table - Siemens SINUMERIK 828D Manual

Tool management

5.1

Tool table

Tools with their complete operating data can be managed in the tool list.
Tools are assigned to the desired magazine locations with the load function.
For each tool, you can store the following data:
– Tool type: e.g. face milling cutter, taps and 3D probes
– Clear tool name in plain text, example: CUTTER_HEAD_63MM
– Max. of 9 cutting edges per tool
– Tool length and diameter
– Nose angle for drills or number of teeth for milling tools
– Spindle direction and coolant (level 1 and 2) and up to four additional functions
Direct transfer of the tool from the list in the program or for measurement
Using the settings, for example, you can activate the graphic magazine display
Reading tools from a file or archiving to a file
Benefits
All tool data at a glance
Simple and secure handling via unmistakable tool names
SINUMERIK Operate - Milling
Control system overview for machine tools' sales people, 2017, A5E41992599B AA
SINUMERIK 828D
BASIC
Basic configuration
SINUMERIK 840D sl
BASIC
Basic configuration
SINUMERIK 828D
Basic configuration
SINUMERIK 840D sl
Basic configuration
5
SINUMERIK 828D
ADVANCED
Basic configuration
41