Making The Initial Settings Using A Computer Or Smartphone - NEC DS1-MP10RX series Operation Manual

4-2-1. Making the initial settings using a computer or smartphone

First, connect the computer or smartphone to the same network as the MultiPresenter Stick (SSID displayed on the screen).
* The following explanation is for Windows 7.
1
Click the wireless LAN icon on the task tray.
.
2
From the list of wireless networks, select the SSID shown on the
.
screen ("SetupMultiPresenter_1234567890" (NOTE: the 1234567890
section differs from product to product)), then click [Connect].
3
Launch the web browser and input the URL indicated on the
.
screen ("http://192.168.120.1").
The language selection menu appears.
4
Select [English] on the web browser screen, then click [NEXT].
.
5
Select [INTELLIGENT CONNECTION (recommended)] or [INFRA-
.
STRUCTURE], then click [NEXT].
• When [INTELLIGENT CONNECTION (recommended)] was select-
ed, this completes the initial settings. Close the web browser.
Proceed to "4-3. Preparing the MultiPresenter application" on
page 12.
• When [INFRASTRUCTURE] was selected, the connection set-
tings screen appears. Proceed to step
6
Follow the instructions of your network administrator for the set-
.
tings for connecting to an existing network.
Example of operation
① Click [SITE SURVEY] and select the SSID (access point).
② Input the SSID's security key (password).
③ To confirm, input the security key again.
7
After making the connection settings, click [NEXT].
.
The next screen appears.
6
below.
10
①
②
③