Table of Contents
Advertisement
No.
Symptom
Images are sometimes interrupted or
6
displayed with a delay.
7
Videos do not play smoothly.
You would like to restore the
8
MultiPresenter Stick's settings to the
factory defaults.
You would like to limit access to web
9
share images.
You would like to limit access to the
10
administrator menu on the web server
screen.
As far as possible, set the MultiPresenter Stick in a position in
which it is visible from the device from which images are being
sent.
Also try moving the device from which images are being sent
closer and changing the direction of the antenna.
Such symptoms can occur happen if the network is busy.
Select the optimum channel at [CHANNEL] under [SETTINGS]
→ [ADMINISTRATOR MENU] → [WIRELESS LAN] on the Multi-
Presenter Stick's web server screen.
From the MultiPresenter application on the device from which
the video is being sent, select [SETTINGS] → [IMAGE], then
lower the [PICTURE QUALITY] and [MAXIMUM FRAME RATE]
values.
Note that depending on the OS you are using, the [MAXIMUM
FRAME RATE] item may not be displayed. Also, depending on
the your wireless LAN environment, it may not be possible to
achieve good performance.
Display the MultiPresenter Stick's settings menu and select [RE-
SET].
Set the [ACCESS PASSWORD] item under [SETTINGS] → [AD-
MINISTRATOR MENU] → [WEB SHARING] on the MultiPresenter
Stick's web server screen.
Set the [ADMINISTRATOR] item under [SETTINGS] → [ADMIN-
ISTRATOR MENU] → [PASSWORD] on the MultiPresenter Stick's
web server screen.
33
Check
Refer to
page
−
−
28
29
−
31
26
27
Advertisement
Table of Contents
