NEC DS1-MP10RX series Operation Manual page 37

8
Select the update file saved in step
.
Once the update is completed successfully, the screen at the
right is displayed.
9
Click the [RESTART] button.
.
10
When the start-up screen is displayed after restarting, check
.
the version number in the lower right of the screen.
▸ ▸
NOTE
If an error occurs during updating, one of the error codes below is displayed.
Error code
0100000001
0100000002
0200000001
0200000002
0100000003
0200000003
0300000006
0100000004
0200000004
0300000007
If an error code other than the ones above is displayed, contact your dealer.
4
.
File is too large.
Check whether you have selected the wrong update file in the file dialog.
File extension is wrong.
Check whether you have selected the wrong update file in the file dialog.
File is damaged.
Re-download the update file.
Session has been closed.
Reconnect the MultiPresenter Stick and computer and perform the software update proce-
dure again.
No response.
Reconnect the MultiPresenter Stick and computer and perform the software update proce-
dure again.
Description
37