Siemens SINUMERIK 840D sl Operating Manual page 78

Machine the workpiece
3.9 Display G and auxiliary functions
Proceed as follows
The G groups selection displayed in the "G functions" window may differ.
References
For more information about configuring the displayed G groups, refer to the
HM sl commissioning manual
Note
Displaying all G functions
You can display all G codes.
78
1. Select the "Machine" operating area.
2. Press the "JOG", "AUTO", or "MDA" key.
...
3. Press the "G functions" softkey.
The "G functions" window is opened.
4. Press the "G functions" softkey again to hide the window again.
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal