Copying/Pasting/Deleting Program Blocks - Siemens SINUMERIK 840D sl Operating Manual

Machine the workpiece
3.8 Editing programs
3.8.4

Copying/pasting/deleting program blocks

Requirement
The program is opened in the editor.
Proceed as follows
Deleting program blocks
Note
The buffer memory contents are retained even after the editor is closed, enabling you to
paste the contents in another program, as well.
74
Press the "Continue search" softkey if the text located during the
search should not be replaced.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
1. Press the "Mark" softkey.
2. Select the desired program blocks with the cursor or mouse.
3. Press the "Copy" softkey in order to copy the selection to the buffer
memory.
4. Place the cursor on the desired insertion point in the program and
press the "Paste" softkey.
The content of the buffer memory is pasted.
Use the "Cut" softkey to delete selected program blocks.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal