Manual Mode; Traversing The Axes; Traverse Axes By A Defined Increment - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

2.6 Manual mode

2.6 Manual mode
2.6.1

Traversing the axes

You can traverse the axes in manual mode via the Increment or Axis keys or handwheels.
During a traverse initiated from the keyboard, the selected axis moves at the programmed
setup feedrate. During an incremental traverse, the selected axis traverses a specified
increment.
Set the default feedrate
Specify the feedrate to be used for axis traversal in the set-up, in the "Settings for manual
operation" window.
2.6.2

Traverse axes by a defined increment

You can traverse the axes in manual mode via the Increment and Axis keys or handwheels.
Proceed as follows
46
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal