Copying/Pasting/Deleting Program Blocks - Siemens SINUMERIK 840D sl Operating Manual

Procedure
Note
Replacing texts
● Read-only lines (;*RO*)
If hits are found, the texts are not replaced.
● Contour lines (;*GP*)
If hits are found, the texts are replaced as long as the lines are not read-only.
● Hidden lines (;*HD*)
If hidden lines are displayed in the editor and hits are found, the texts are replaced as long
as the lines are not read-only. Hidden lines that are not displayed, are not replaced.
6.10.4

Copying/pasting/deleting program blocks

In the editor, you edit both basic G code as well as program steps such as cycles, blocks and
subprogram calls.
Grinding
Operating Manual, 05/2017, A5E40869190
1. Press the "Search" softkey.
A new vertical softkey bar appears.
2. Press the "Find and replace" softkey.
The "Find and Replace" window appears.
3. In the "Text" field, enter the term you are looking for and in the "Replace
with" field, enter the text you would like to insert automatically during the
search.
4. Position the cursor in the "Direction" field and choose the search direction
(forward, backward) with the <SELECT> key.
5. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is high‐
lighted.
6. Press the "Replace" softkey to replace the text.
- OR -
Press the "Replace all" softkey to replace all text in the file that corre‐
sponds to the search term.
- OR -
Press the "Continue search" softkey if the text located during the search
should not be replaced.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
Machining the workpiece
6.10 Editing a program
137