Siemens SINUMERIK 840D sl Operating Manual page 101

References
More detailed information on cylinder error compensation can be found in the following
reference:
Extension Functions (FB2sl) Function Manual:
● Chapter: "Compensations (K3)"
Precondition
● The option is set
● A compensation table for sag compensation (CEC) has been set up.
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
Machine manufacturer
Please observe the information provided by the machine manufacturer.
1. Select the "Parameter" operating area.
2. Press the "Setting data" and "Cylinder error compensation" softkeys.
The "Cylinder Error compensation" window opens.
3. Select the desired data set in the "Compensation" selection field.
4. For measuring points P1 and P2, enter the basis value (ZM) and com‐
pensation value (XM).
The "Set comp." softkey can be used after entering the compensation
values.
5. Press the "Set comp." softkey.
The compensation is applied.
- OR -
Press the "Delete comp." softkey if you wish to delete the compensation
values.
The cylinder error compensation is deleted.
Setting up the machine
4.8 Monitoring axis and spindle data
101