Reading In An Archive In The Program Manager - Siemens SINUMERIK 840D sl Operating Manual

14.15.3

Reading in an archive in the Program Manager

In the "Program Manager" operating area, you have the option of reading in archives from the
archive folder of the system data as well as from configured USB and network drives.
Procedure
...
Grinding
Operating Manual, 05/2017, A5E40869190
12. Select the format (e.g. archive ARC (binary format) for 840D sl or archive
ARD for 828D), enter the desired name and press the "OK" softkey to
archive the file/files.
A message informs you if archiving was successful.
13. Press the "OK" softkey to confirm the message and end the archiving
operation.
An archive file in the .ARC (840D sl) or .ARD (828D) format type is created
in the selected directory.
Software option
In order to read-in user archives in the "Program Manager" operating area, you
require the option "Additional HMI user memory on CF Card of NCU" (not for
840D sl / SINUMERIK Operate on PCU50 / PC).
1. Select the "Program Manager" operating area.
2. Press the "Archive" and "Read in archive" softkeys.
The "Read in archive: Select archive" window opens.
3. Select the archive storage location and position the cursor on the
required archive.
Note: When the option is not set, the folder for user archives is only
displayed if the folder contains at least one archive.
- OR -
Press the "Search" softkey and in the search dialog, enter the name
of the archive file with file extension (*.arc) for 840D sl or with file
extension (*.ard) for 828D if you wish to search for a specific archive
and press the "OK" softkey.
4. Press the "OK" or "Overwrite all" softkey to overwrite existing files.
Managing programs
14.15 Backing up data
341