Deleting/Unloading/Loading/Relocating All Tools - Siemens SINUMERIK 840D sl Operating Manual

Several magazines
If you have set up several magazines, then the "...relocate from magazine... location... to..."
window appears after pressing the "Relocate" softkey.
Select the desired magazine and location, and confirm your selection with "OK" to load the
tool.
13.8.3

Deleting/unloading/loading/relocating all tools

You have the option of deleting all tools from the magazine list, unloading all tools from the
magazine list, loading them to the magazine list, and relocating them in the magazine list at
the same time.
Preconditions
The following requirements must be met so that the "Delete all," "Unload all," "Load all," or
"Relocate all" softkey is displayed and is available:
● Magazine management is set up
● There is no tool in the buffer / in the spindle
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
1. The magazine list opens.
2. Press the "Delete all" softkey.
- OR -
Press the "Unload all" softkey.
- OR -
Press the "Load all" softkey.
- OR -
Press the "Relocate all" softkey.
A prompt is displayed asking whether you really want to delete, unload,
load, or relocate all tools.
3. Press the "OK" softkey to go ahead and delete, unload, load, or relocate
the tools.
The tools are deleted, unloaded, loaded, or relocated in the displayed
order, i.e. as specified by the sorting and the set filter.
4. Press the "Cancel" softkey if you wish to cancel the unloading operation.
Manage tools
13.8 Magazine
285