Setting up the machine
4.8 Monitoring axis and spindle data
Procedure
4.8.3
Spindle chuck data
4.8.3.1
Defining spindle chuck data
You store the chuck dimensions of the spindles at your machine in the "Spindle Chuck Data"
window.
Manually measuring a tool
If you want to use the chuck of the main or counter-spindle as a reference point during manual
measuring, specify the chuck dimension ZC.
Main spindle
Dimensions, main spindle jaw type
1
98
1.
Select the "Parameter" operating area.
2.
Press the "Setting data" and "Spindle data" softkeys.
The "Spindles" window opens.
3.
If you want to change the spindle speed, place the cursor on the "Maxi‐
mum", "Minimum", or "Spindle speed limitation at G96" and enter a new
value.
Dimensions, main spindle jaw type 2
Operating Manual, 05/2017, A5E40869190
Grinding